Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Ace Glass, Inc. FEP tubing, 1/2in OD x 3/8in ID, 10ft length
O.D x 3/8 I.D. FEP tubing made of high molecular weight resin for excellent stress crack resistance. Meets FDA requirements for repeated food contact. Chemically inert to most industrial chemicals and solvents. 10ft length.
Ace Glass, Inc. FEP tubing, 3/8in OD x 5/16in ID, 10ft length
3/8 O.D. x 5/16 I.D. FEP tubing made of high molecular weight resin for excellent stress crack resistance. Meets FDA requirements for repeated food contact. Chemically inert to most industrial chemicals and solvents. 10ft length.
Grainger Hose Extension 36 in L
The Lincoln 36" Hose Extension is a rubber hose designed to extend the reach of an existing hose. It has a 3/4" inner diameter and is made of heavy duty rubber reinforced with a wire coil. The hose has machined brass couplings and is rated for 300 PSI working pressure. It can handle temperatures from -40°F to 150°F. The hose measures 36" long when fully extended and weighs approximately 2 lbs. It is manufactured in the USA by Lincoln Industrial Corp. This hose extension allows you to easily join two hoses together to increase your hose length.
Electron Microscopy Sciences Vacuum Pick-Up 7/16" Suction Cup
Accessory for use with the Vacuum Pick Up System.
AVANTOR MASTERFLEX (VWR LLC) TUBE ASSEMBLY SIZE 16 PUMP LIN
NC2894897 TUBE ASSEMBLY SIZE 16 PUMP LIN
Foxx Life Sciences Imaweld Heat Sealable and Weldable TPE Tube 9.5mm (3/8") ID X 15.87mm (5/8") OD, 50 FT
Imaweld is thermoplastic elastomer opaque tubing designed for fluid transfer in pharmaceutical and biotech applications. Imaweld is specially formulated which meets requirement of pharmaceutical industries with superiority compare to PVC and Silicone.• Free of any toxic ingredients. successfully meets toxicity free requirements.• Manufactured and Packaged in Clean Room Class of ISO 9001, ISO 14001 and OHSAS 18001 certified facility• Heat sealable and weldable to facilitate sterile connection• Working Temperature Range -40°C to +135°C• USP Class VI Certification• TSE/BSE CertificationAll standard dimensions are in mm and Inch dimensions are for reference only.
Foxx Life Sciences Imaweld Heat Sealable and Weldable TPE Tube 19.05mm (3/4") ID X 25.4mm (1") OD, 50 FT
Imaweld is thermoplastic elastomer opaque tubing designed for fluid transfer in pharmaceutical and biotech applications. Imaweld is specially formulated which meets requirement of pharmaceutical industries with superiority compare to PVC and Silicone.• Free of any toxic ingredients. successfully meets toxicity free requirements.• Manufactured and Packaged in Clean Room Class of ISO 9001, ISO 14001 and OHSAS 18001 certified facility• Heat sealable and weldable to facilitate sterile connection• Working Temperature Range -40°C to +135°C• USP Class VI Certification• TSE/BSE CertificationAll standard dimensions are in mm and Inch dimensions are for reference only.
